Create with Accessories
How to Use Our Air Inflator
Place the air inflator on a clean, flat surface. Plug into a grounded 110V-120V electric outlet.
Determine which tip to use. See Tip Guide below. Then attach tip to base (if applicable).
Determine which mode to use. Mode switch can be found at the top of the inflator.
Push to Inflate Mode: Hold balloon tightly over chosen tip. Press single balloon button, then push down to inflate. Release to stop.
Continuous Run Mode: Attach the air valve to the nozzle, and hold tightly. Continuous Run mode will begin inflating once power switch is turned on. Turn off to stop.
Do not exceed 2 minutes of continuous use. Allow motor to rest for 15 minutes if using for more than 2 minutes.
Plug into a grounded 110V-120V electric outlet.
Determine which tip to use based on what you wish to deflate.
Attach tip to bottom of unit. Insert tip into the air valve of the inflatable.
Flip power switch to Continuous Run power mode to deflate.
Do not exceed 2 minutes of continuous use. Allow motor to rest for 15 minutes if using for more than 2 minutes.
Air Inflator Tip & Mode Guide
Latex Balloons
Large Tip
Push to Inflate mode
Foil Balloons
Small Tip
Push to Inflate mode
Pool Inflatables
Small Tip
Continuous Run mode
Air Mattresses
Base Nozzle
Continuous Run mode
More Info
Perfect for any
occasion!
Ready in a snap!
No assembly required.
Take and inflate:
At home or on the go!